Pöttinger HIT 8.91 - Anul fabricaţiei 2022

Pöttinger HIT 8.91 16.541 €

Dealer number 300143136

Preţ incl. TVA 19 % 16.541 €

Preţ fără TVA 13.900 €

Producător Pöttinger

Model HIT 8.91

Anul fabricaţiei 2022

Alte informaţii

Tipul autovehiculului: Maşină second hand

Producător: Pöttinger

Model: HIT 8.91

Anul fabricaţiei: 2022

Detalii

HIT 8.91
Pöttinger tedder
PTO shaft with freewheel 1 3/8", 6-piece
Three-point linkage Cat. II
Standard tine 9.5 mm
Drive 540 rpm
Warning signs with lighting
PÖTTINGER equipment
Working width 8.86m
Transport width 3m
Transport height 3.65
Weight 1250 kg
Number of rotors 8
Number of arms per rotor 6
Power requirement 75PS
Tine loss protection
Damping struts
-Perfect ground hugging due to
double-cut frame hinges
-The center of gravity is close to the
short three-point headstock close to the tractor
tractor
-The pivoting headstock heart pin
centers the machine in the middle position
in the center position
-The vertical pivot point reliably prevents
reliably prevents underrunning when
downhill travel and guarantees a large
lift height at the headland
-Two damping struts ensure optimum
centering, which ensures that the machine
smooth tracking of the machine is ensured
is ensured
-Clean spreading pattern due to curved tine arms
tine arms
-Cleaner forage intake due to small
rotor diameter
-Cleaner forage due to optimum
ground adaptation of the individual rotors
-Rotor tilt can be adjusted without tools
fivefold
Optimum working quality under all
operating conditions
-Clean feed intake and best spreading
spreading quality due to unevenly long
tine legs
-The rotor disks are made from
stable, thick-walled molded parts
with precise support for the tines.
The tine arms are additionally
bolted to the inside of the rotor hub, which
a high-strength connection is achieved
-The solid tine arms are made from
flat steel with press-fit joints This ensures
secure and firm fit of the tines
-The HEAVY-DUTY tines stand for
particularly long service life
-The double tines are made from the best
spring steel in Super C quality
manufactured
-The curved bracket supports the tine
the tines in their function and makes them
and makes them more resistant
-The integrated tine loss protection
is standard This also improves
additionally improves the support of the
tine windings
-Force-locking, smooth-running and
backlash-free drive due to
permanently lubricated single and
double joints -Large gear wheels and bearings
bearings ensure a smooth-running drive
drive
-The closed angular gearboxes are equipped
equipped with grease lubrication
-No oil loss possible
-The joints are mounted on a toothed shaft
shaft
Automatic translation from German without guarantee.
Show original description